Comparison between a real model vs a digital model of the cold steel sheet cutting process
DOI:
https://doi.org/10.17981/bilo.4.1.2022.01Keywords:
Digital model comparison, Cold steel cutting, Process simulation, Steel cutting analysis, Steel sheetsAbstract
Over time, the use of technological tools to analyze processes has become very essential. Therefore, in this project, a comparison will be made between the real results of a cold cutting process of steel sheets, developed in a company in the metalworking industry, through the use of automated machines, and the results obtained from the simulation of the process in Arena® software. It begins with the observation of the conventional cutting process of cold steel sheet rolls, which was carried out in a period of 8 hours, equivalent to one working day. Once all the activities were observed and analyzed, the data obtained were recorded. Subsequently, the simulation of the production process was designed to compare the similarity between the results of the simulated model, vs the results of the real model. The simulated modeling results yielded 95% conforming values with 5% non- conforming. Finally, the real calculations show results of 94.46% compliance and 5.54% non-compliance, which indicates that the simulated process resembles the real process.
Downloads
References
L. De Lucca De Costa, A. Guerreiro Brito, A. Rosiak y L. Schaeffer, «Study of the applicability of 22MnB5 sheet metal as protective masks to improve tool life in hot forging process,» International Journal of Advanced Manufacturing Technology, vol. 107, nº 1-2, pp. 39-47, 2020.
A. Troncoso, A. Sanchez y J. Gonzalez, «Discrete Events Simulation Method for Analyze Cycle Time: A Case Study in the Plastics Industry Sector,» IOP Science, nº 844 012063, 2020.
G. Rodríguez Medina, S. Balestrini Atencio, S. Balestrini Atencio, R. Meleán Romero y B. Rodríguez Castro, «Análisis estratégico del proceso productivo en el sector industrial,» Revista de Ciencias Sociales (RCS), vol. VIII, nº 1, pp. 135-156, 2012.
E. Chacón, «Investigación operativa: Método de Montecarlo,» Boletín de Estudios Económicos, vol. XII, nº 43, 2015.
J. Peralta Abarca, «Simulación de procesos a través de eventos discretos,» Universidad Autónoma del Estado de Morelos, 2018.
R. Sundaria, D. G. Nair y A. Lehikoinen, «Effect of Laser Cutting on Core Losses in Electrical Machines-Measurements and Modeling,» IEEE Transactions on Industrial Electronics, vol. 67, nº 9, pp. 7354-7363, 2020.
B. Romero Casillas, «Métodos de simulación. Instituto Nacional de Administración Publica,» 2014.
C. Appino , E. Ferrara y F. Fiorillo , «Static and dynamic energy losses along different directions in GO steel sheets,» JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, vol. 500, APR 15 2020.
A. Segura-Henríquez, A. Troncoso-Palacio, J. Vera-Ruiz y F. Muñoz-La--Rivera, «Continuous Improvement Integrating Technological Tools to Assertively Accelerate Decision-making of Logistics. Case Implemented in a Construction Materials Supplier Company,» 9th International Conference on Traffic and Logistic Engineering (ICTLE), 2021.
S. Stoyanov, D. Petring y D. Arntz-Schroeder, «Investigation on the melt ejection and burr formation during laser fusion cutting of stainless steel,» Journal of Laser Applications, vol. 32, nº 2, 2020.
V. Manescu, G. Paltanea, E. Ferrara, L. Vasile Nemoianu, F. Fiorillo y H. Gavrila, «Influence of mechanical and water-jet cutting on the dynamic magnetic properties of NO Fe-Si steels,» Journal of Magnetism and Magnetic Materials, vol. 499, 2020.
A. Troncoso Palacio, D. Neira Rodado, M. Ortíz Barrios, G. Jiménez Delgado y H. Hernández Palma, «Using Discrete-Event-Simulation for Improving Operational Efficiency in Laboratories: A Case Study in Pharmaceutical Industry,» International Conference on Swarm Intelligence, vol. 10942, pp. 440-451, 2018.
A. Troncoso Palacio, «El modelado, la simulación de procesos y los gemelos digitales: soporte para la toma de decisiones,» Revista Virtual Pro Procesos Industriales, nº 227, 2020.
L. Averil M, «How to conduct a successful simulation study,» Proceedings of the 2003 Winter Simulation Conference, 2004.
J. Ni, J. Min y H. Wan, «Effect of adhesive type on mechanical properties of galvanized steel/SMC adhesive-bonded joints,» International Journal of Adhesion and Adhesives, vol. 97, nº 102482, 2020.
J. M. Rodríguez Barrios, D. Serrano y M. Toni, «Los modelos de simulación de eventos discretos en la evaluación económica de tecnologías y productos sanitarios,» Gaceta Sanitaria, vol. 22, pp. 151-161, 2008.
M. Madic, S. Mladenovic y M. Gostimirovic, «Laser cutting optimization model with constraints: Maximization of material removal rate in CO2 laser cutting of mild steel,» Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2020.
R. Reese y S. Sheppard, «A Software Development Environment for Simulation Programming,» WSC '83: Proceedings of the 15th conference on Winter Simulation, vol. 2, p. 419–428, 1983.
Metalmecánica industrial, «www.metalmecanica.com,» Metalmecanica industrial, 2018. [En línea]. Available: http://www.metalmecanica.com/temas/Sector-metalmecanico,-el-de-mayor-proyeccion-en-Colombia,-Fedemetal+127281.
J. Chen y D. Kelton, «Quantile and Histogram Estimation,» Winter simulation Conference, vol. 2, p. 419–428, 2001.
P. Sahoo, K. Patra, V. Kumar Singh, M. Kumar Gupta, Q. Song, M. Mia y D. Yurievich Pimenov, «Influences of TiAlN coating and limiting angles of flutes on prediction of cutting forces and dynamic stability in micro milling of die steel (P-20),» Journal of Meterials Processing Technology, vol. 278, 2020.
Lander simulation & training, «www.landersimulation.com/es/trabajo/formacion-integral,» 2015. [En línea]. Available: https://www.landersimulation.com/es/trabajo/formacion-integral.
English
Español (España)
