Analysis of Physical and Mechanical Properties Adobe Enhanced With Asphalt Recycling
DOI:
https://doi.org/10.17981/10.17981/ingecuc.16.2.2020.06Keywords:
mechanical strength, structural behavior, sustainable construction material, buildings of earth, recycled asphalt, mud bricksAbstract
Introduction— In this work we have carried out a physical and mechanical analysis of the improvement of the material of mud brick (in Colombia it is known as “Adobe”) with recycled asphalt.
Objective— Evaluate in the laboratory, the behavior of the material of mud brick with the addition of recycled asphalt.
Methodology— In order to meet the objective, quantitative research was conducted to characterize the physical evidence by analysis of particle size and density. The same tests characterize the mechanical strength in mud brick blocks, built with zero, two, four and eight percent recycled asphalt doses. It is based on laboratory testing.
Results— According to the results obtained in the tests, mechanical properties, such as resistance to compression and bending were improve, adding recycled asphalt to Mud brick and in comparison with samples without content of asphalt.
Conclusions— The mud bricks stabilized with two percent of recycled asphalt have the best performance in compressive and flexural strength according to laboratory testing.
Downloads
References
D. Ruiz, M. Silva, L. Cerón & C. López, “Seismic performance of rammed earth town halls reinforced with confinement wooden elements,” RICUC, vol. 32, no. 2, pp. 25–44, Aug. 2017. Available: https://www.ricuc.cl/index.php/ric/article/view/633/html_1
M. Blondet, G. Villa & S. Brzev, Construcciones de Adobe resistentes a los terremotos: Tutor, Oak, Ca, USA: EERI, Abr., 2003. Disponible en http://www.world-housing.net/tutorials/adobe-tutorials
M. Costi de Castrillo, M. Philokyprou & I. Ioannou, “Comparison of adobes from pre-history to-date,” JASR, vol. 12, pp. 437–448, Apr., 2017. Available: https://www.sciencedirect.com/science/article/abs/pii/S2352409X16306058?via%3Dihub
R. Aguilar, M. Noel & L. Ramos, “Integration of reverse engineering and non-linear numerical analysis for the seismic assessment of historical adobe buildings,” Autom Constr, vol. 98 , pp. 1–15, Feb. 2019. Available: https://www.sciencedirect.com/science/article/abs/pii/S092658051830743X?via%3Dihub
J. Reyes, L. Yamin, W. Hassan, J. Sandoval, C. Gonzalez & F. Galvis, “Shear behavior of adobe and rammed earth walls of heritage structures,” Eng Struct, vol. 174, pp. 526–537, Nov. 2018. Available: https://www.sciencedirect.com/science/article/abs/pii/S0141029618311866?via%3Dihub
M. Villar-Vega & V. Silva, “Assessment of earthquake damage considering the characteristics of past events in South America,” Soil Dyn. Earthq. Eng., vol. 99, pp. 86–96, Aug. 2017. Available: https://www.sciencedirect.com/science/article/abs/pii/S0267726116302068?via%3Dihub
A. Vasquez, L. Botero & D. Carvajal, “Fabricación de bloques de tierra comprimida con adición de residuos de construcción y demolición como remplazo del agregado pétreo convencional,” Rev. Ing. Cienc., vol. 11, no. 21, pp. 197–220, Jan. 2015. https://doi.org/10.17230/ingciencia.11.21.10
S. Bossio, M. Blondet & S. Rihal, “Seismic behavior and shaking direction influence on adobe wall structures reinforced with geogrid,” Earthq. Spectra., vol. 29, no. 1, pp. 59–84, Feb. 1, 2013. https://doi.org/10.1193/1.4000096
N. Tarque, H. Crowley, R. Pinho & H. Varum, “ Displacement-based fragility curves for seismic assessment of adobe buildings in Cusco, Peru,” Earthq. Spectra., vol. 28, no. 2, pp. 759–794 , May. 1 2012. https://doi.org/10.1193/1.4000001
E. Sayin, B. Yön, Y. Calayir & M. Gör, “Construction failures of masonry and adobe buildings during the 2011 Van earthquakes in Turkey,” Struct. Eng. Mech., vol. 51, no. 3, pp. 503–518, Aug. 10, 2014. https://doi.org/10.12989/sem.2014.51.3.503
D. Güney, A. Kuruşcu & G. Arun, “Damage Evaluation of Masonry Buildings after Van Earthquakes in 2011,” Int. J. Archit. Herit., vol. 10, no. 2-3, pp. 269–280, Apr. 2016. https://doi.org/10.1080/15583058.2015.1113343
A. Olukoya & S. Kurt, “Environmental impacts of adobe as a building material: The north cyprus traditional building case,” Case Stud. Constr. Mater., vol. 4, pp. 32–41, Jun. 2016. https://doi.org/10.1016/j.cscm.2015.12.001
H. Acevedo-Agudelo, A. Vásquez-Hernández & D. Ramírez-Cardona, “Sustainability: Actuality and necessity in the construction sector in Colombia,” Gestión y Ambiente, vol. 15, no. 1, pp. 105–118, Jan. 2012. Available: https://revistas.unal.edu.co/index.php/gestion/article/view/30825
S. Riveros, “El uso masivo de la tierra como material de construcción en Colombia,” Apuntes, vol. 20, no. 2, pp. 354–363, 2007. Available: https://revistas.javeriana.edu.co/index.php/revApuntesArq/login?source=%2Findex.php%2FrevApuntesArq%2Farticle%2Fview%2F8990
E. Maldonado & G. Chio, “Estimación de las funciones de vulnerabilidad sísmica en edificaciones en tierra,” Rev. Cient. Ing. Des., no. 25 , pp. 1–5, 2009. Available: https://rcientificas.uninorte.edu.co/index.php/ingenieria/article/view/1579
Instituto de Desarrollo Urbano, Sitios de disposición final escombros y material de excavaxión activas a septiembre 30 de 2011. Bta., Col.: IDU, 2011.
J. Rivera, “El adobe y otros materiales de sistemas constructivos en tierra cruda: caracterización con fines estructurales,” Apuntes, vol. 25, no. 2, pp. 164–181, 2012. Available: https://revistas.javeriana.edu.co/index.php/revApuntesArq/login?source=%2Findex.php%2FrevApuntesArq%2Farticle%2Fview%2F8763
D. Silveira, H. Varum, A. Costa & C. Neto, “Survey of the Facade Walls of Existing Adobe Buildings,” Int. J. Archit. Heritage, vol. 10, no. 7, pp. 867–886, Mar. 2016. https://doi.org/10.1080/15583058.2016.1154114
T. Januševičius, J. Mažuolis & D. Butkus, “Sound reduction in samples of environmentally friendly building materials and their compositions,” Appl. Acoust., vol. 113, pp. 132–136, Dec. 2016. https://doi.org/10.1016/j.apacoust.2016.06.014
K. Arteaga, “Bloque de tierra comprimida como material constructivo,” Rev. Fac. Ing, vol. 20, no. 31, pp. 58–66, Nov. 6, 2011. Disponible en https://revistas.uptc.edu.co/index.php/ingenieria/article/view/1421
E. Hamard, B. Lemercier, B. Cazacliu, A. Razakamanantsoa & J.-C. Morel, “A new methodology to identify and quantify material resource at a large scale for earth construction – Application to cob in Brittany,” Constr. Build. Mater., vol. 170, pp. 485–497, May. 2018. https://doi.org/10.1016/j.conbuildmat.2018.03.097
L. Barros & F. Imhoff, “Resistencia sísmica del suelo-cemento postensado en construcciones de baja complejidad geométrica,” Rev. Const., vol. 9, no. 2, pp. 26–38, Dec. 2010. https://doi.org/10.4067/S0718-915X2010000200004
T. Li Piani, D. Krabbenborg, J. Weerheijm, L. Koene & L. Sluijs, “The mechanical performance of traditional adobe masonry components: An experimental-analytical characterization of soil bricks and mud mortar,” J. Green Build., vol. 13, no. 3, pp. 17–44, 2018. https://doi.org/10.3992/1943-4618.13.3.17
B. Orta, J. Adell, R. Bustamante & S. Martínez-Cuevas, “Sistema de autoconstrucción sismorresistente: características resistentes y proceso constructivo,” Inf. constr., vol. 68, no. 542, pp. 1–10, June 24, 2016. https://doi.org/10.3989/ic.15.082
M. Rodríguez & B. Saroza, “Determination of the optimum composition of adobe brick for a school in Cuba,” Rev. Mat. de Const., vol. 56, no. 282, pp. 53–62, 2006. https://doi.org/10.3989/mc.2006.v56.i282.27
H. Rondón-Quintana, C. Urazán-Bonells & S. Chaves-Pabón, “Influence of compaction temperature on the resistance of a stabilized granular material with asphalt cement,” Técno. Lóg., vol. 18, no. 34, pp. 51–62, 2015. https://doi.org/10.22430/22565337.218
J. Kodikara, T. Islam & A. Sounthararajah, “Review of soil compaction: History and recent developments, “Transp. Geotech., vol. 17, part B, pp. 24–34, Dec. 2018. https://doi.org/10.1016/j.trgeo.2018.09.006
A. Ghanizadeh, M. Rahrovan & K. Bafghi, “The effect of cement and reclaimed asphalt pavement on the mechanical properties of stabilized base via full-depth reclamation,” Const. Build. Mat., vol. 161, pp. 165–174 , Feb. 2018. https://doi.org/10.1016/j.conbuildmat.2017.11.124
C. Bedoya, Construcción sostenible para volver al camino, MDE, CO: Bike, 2011. Available: https://repositorio.unal.edu.co/handle/unal/7378
J. Cid, F. Mazarrón & I. Cañas, “Las normativas de construcción con tierra en el mundo,” Inf. de la Const., vol. 63, no. 523, pp. 160–169. https://doi.org/10.3989/ic.10.011
L. Yamín, C. Phillips, J. Reyes & D. Ruíz, “Estudios de vulnerabilidad sísmica, rehabilitación y refuerzo de casas en adobe y tapia pisada,” Revista Apuntes, vol. 20, no. 2, pp. 286–303, 2007. Available: http://hdl.handle.net/10554/23002
P. Milani & M. Paradiso, Reconstruir en adobe, Análisis, consideraciones y propuestas para la reconstrucción, Flr., It.: Medina, 2010.
K. Díaz, L. Rios & L. Yamin, “Alternativas de rehabilitación de adobe y tapia pisada,” Tesis Magistral, Dpto. Ing. Civ. Amb., UniAndes, BO. Co., 2005. Disponible en http://hdl.handle.net/1992/10814
Instituto Nacional de Vías, Especificaciones generales de construcción de carreteras y normas de ensayo para materiales de carreteras, BO, CO: Invías, 2013. Available: https://www.invias.gov.co/index.php/documentos-tecnicos-izq/139-documento-tecnicos/1988-especificaciones-generales-de-construccion-de-carreteras-y-normas-de-ensayo-para-materiales-de-carreteras
“ASTM C67-17” Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile, American Society Testing and Materials International, ASTM, West Conshohocken, PA, 2017. https://doi.org/10.1520/C0067-17
A. Dutu, M. Niste, I. Spatarelu, D. Dima & S. Kishiki, “Seismic evaluation of Romanian traditional buildings with timber frame and mud masonry infills by in-plane static cyclic tests,” Eng. Struct., vol. 167, pp. 655–670, Jul. 2018. https://doi.org/10.1016/j.engstruct.2018.02.062
“ASTM C469/C469M-14e1” Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, American Society Testing and Materials International, ASTM, West Conshohocken, PA, 2014. Available: https://www.astm.org/Standards/C469
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 INGE CUC
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Published papers are the exclusive responsibility of their authors and do not necessary reflect the opinions of the editorial committee.
INGE CUC Journal respects the moral rights of its authors, whom must cede the editorial committee the patrimonial rights of the published material. In turn, the authors inform that the current work is unpublished and has not been previously published.
All articles are licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
English
Español (España)
