Modelo de tasa de inyección en fase líquida para el inyector Isuzu 4JJ1 mediante dinámica de fluidos computacional

Authors

  • Jorge Duarte Forero Universidad del Atlántico
  • Daniel García Universidad del Atlántico
  • Jesús Bello Universidad del Atlántico

DOI:

https://doi.org/10.17981/ladee.01.01.2020.2

Keywords:

CFD, Diesel, Injection, Model, Rate

Abstract

The following work develops a simulation-based model using computational fluid dynamics (CFD) for predicting the behavior of cold liquid injection of the ISUZU 4JJ1 injector. For this purpose, the current physical principles and technological trends are reviewed. For model validation, it was compared with a theoretical model, to which the model is adjusted by a correction factor, then a multifactorial variance analysis is performed to determine the influence of the different parameters on the injection rate.

Downloads

Download data is not yet available.

Author Biography

Jorge Duarte Forero, Universidad del Atlántico

Docente Investigador del programa de Ingeniería Mecánica de la Universidad del Norte.

Downloads

Published

2020-11-26

How to Cite

Duarte Forero, J., García, D., & Bello, J. (2020). Modelo de tasa de inyección en fase líquida para el inyector Isuzu 4JJ1 mediante dinámica de fluidos computacional. LADEe Latin American Developments in Energy Engineering, 1(1), 10–25. https://doi.org/10.17981/ladee.01.01.2020.2

Issue

Vol. 1 No. 1 (2020): Julio-Diciembre

Section

Artículos

License

You are free to:

  1. Share — copy and redistribute the material in any medium or format
  2. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. NonCommercial — You may not use the material for commercial purposes .
  3. NoDerivatives — If you remix, transform, or build upon the material, you may not distribute the modified material.
  4. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.